Nordic BS-L0218, Operating Manual

2

NORDIC

PRODUCT SPECIFICATION

Voltage: 

18V

No Load Speed: 

120-320M/min

Belt Size:

457x76mm

This tool requires a 4.0AH or 5.0AH battery. (2.0AH not recommended)

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in 
electric shock, fire and/or serious injury. 
Keep safety warnings and instructions for future reference. 
The term “power tool” in the safety warnings refers to your mains operated (corded) power tool or battery- 
operated (cordless) power tool.

2.0 BEFORE USE

Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your purpose.
If the machine is new, the battery must first be charged.
Attention! After long time storage, the battery capacity will be reduce.
A new battery or one which has not been used for an extended period achieves full performance only 
after charging and discharging cycles. A substantial drop in operating period per charge indicates that the 
battery is worn out and must be replaced.

2.1 WORKING AREA

•  Keep work area clean and well lit. Cluttered and dark areas invite accidents.
•  Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,  

gases or dust. Power tools create sparks which may ignite the dust or fumes.

•  Keep children and bystanders away while operating a power tool.  

Distractions can cause you to lose control.

2.2 ELECTRICAL SAFETY

•  Always check that the power supply corresponds to the voltage on the rating plate.

•  Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed 

power tools. Unmodified plugs and matching outlets will reduce the risk of an electric shock.

