DORIS
24
7193750 Rev.03 – EN
12.2.
CLEANING OF THE GLASS
Thanks to a specific entry of the secondary air the building of deposit on the glass of the door is slowed down in a
remarkable way. However the building of this deposit cannot be avoided with the use of solid fuels such as wet wood,
and this is not to be considered as a defect of the appliance.
IMPORTANT: The cleaning of the sight glass must be carried out only and exclusively with cold appliance to
avoid the explosion of the same. Do not use cloths, abrasive or chemically aggressive products by
cleaning the hearth glass.
The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air
regulator, enough draught of the chimney-flue and the presence of combustion air are the essential elements for the
optimal functioning of the appliance and for the cleaning of the glass.
BREAK OF GLASSES: Considering that the glasses are manufactured in glass-ceramic and resistant to heat
shock up to 750 °C, they are not subject to thermal shocks. Their break can be caused only by mechanic
shocks (bumps or violent closure of the door, etc.). Therefore, their replacement is not included in the
warranty.
12.3.
CLEANING OF THE ASH DRAWER
All the appliances are equipped with a hearth grate and an ash drawer
for the collection of the ashes (Picture 8 pos. A)
It is suggested to empty periodically the ash drawer and to avoid it fills
completely in order not to overheat the grate. Moreover, we recommend
leaving always 3-4 cm of ash in the hearth.
ATTENTION: The ashes removed from the hearth have to be stored in
a container made of fire-resistant material equipped with an air-
tight cover. The container has to be placed on a fire-resistant
floor, far from flammable materials up to the switching off and
complete cooling.
12.4.
MAJOLICAS
LA
NORDICA has chosen majolica tiles, which are the result of high-quality artisan work and therefore the majolica
may present crackles, speckles, and shadings. These characteristics certify their precious origin.
Enamel and majolica, due to their different coefficient of dilatation, produce microcrackles, which show their authentic
feature. For the cleaning of the majolica we suggest you use a soft and dry cloth; if you use a detergent or liquid, the
latter might soak in and make the crackles more visible.
13. SUMMER STOP
After cleaning the hearth, chimney and hood, totally eliminating the ash and other eventual residues, close all the
doors of
the hearth and the relevant registers and disconnect the appliance from the chimney.
We suggest performing the cleaning operation of the flue at least once per year; verifying in the meantime the actual
status of the rope seals which cannot ensure the good operation of the equipment if they are not in good condition
and are not making a good seal! In this case the seals must be replaced.
In presence of dampness in the room where the stove has been placed, we advise you to put absorbent salts into the
hearth.
If you want to keep for long the aesthetic look of the stove it is important to protect its internal walls in row cast iron
with neutral Vaseline.
14. CONNECTING A CHIMNEY OR OPEN FURNACE TO THE FLUE
The smoke channel is the section of tube that connects the product to the flue, in the connection these simple but
very important principles must be followed:
•
for no reason must the smoke channel be used with a diameter lower than that of the neck of the outlet with
which the product is fitted;
•
each metre of horizontal route of the smoke channel causes a small leak of charge which should be
compensated for by raising the flue;
•
the horizontal section must never be higher than 2 m (UNI 10683-2005);
•
each bend of the smoke channel considerably reduces the draught of the flue which must be compensated
for by raising it suitably;
•
the UNI 10683-2005 Regulation –Italy requires that the bends or variations of direction must in no case be
greater than 2 including the emission into the flue.
Picture 8
A
Summary of Contents for Doris Bianco Infinity
Page 48: ...DORIS 48 7193750 Rev 03 IT EN DE FR 16 MONTAGGIO ASSEMBLY MONTAGE 1 2 41x 2x 4x 2x 2x ...
Page 49: ...DORIS 7193750 Rev 03 IT EN DE FR 49 3 4 298 298 ...
Page 50: ...DORIS 50 7193750 Rev 03 IT EN DE FR 6 5 7 9 8 ...
Page 51: ...DORIS 7193750 Rev 03 IT EN DE FR 51 Dx IMPORTANT 10Silk VOGUE 7 x 7 x Sx IMPORTANT ...
