ROSSELLA R1 BII – LUNA BII
26
1191015 – EN
7-
Place the flat tile (O) on the suitable supports of the cast iron cap.
8-
Place the two curved tiles (L) and (I) over the metal cap (B) hooking them to the supports as shown in the
detail.
9-
Screw up the two screws (P) in the suitable seats placed on the curved tiles (do not tighten too much).
W
ARNINGS:
-
Remove adhesive tape (H) before proceeding with the assembly of side tiles.
- Hook the tiles using a great care because they are fragile and may become damaged
.
14. SUMMER STOP
After cleaning the hearth, chimney and hood, totally eliminating the ash and other eventual residues, close all the
doors of the hearth and the relevant registers and disconnect the appliance from the chimney.
We suggest performing the cleaning operation of the flue at least once per year; verifying in the meantime the actual
status of the rope seals which cannot ensure the good operation of the equipment if they are not in good condition
and are not making a good seal! In this case the seals must be replaced.
In presence of dampness in the room where the stove has been placed, we advise you to put absorbent salts into the
hearth.
If you want to keep for long the aesthetic look of the cooker it is important to protect its internal walls in row cast iron
with neutral Vaseline.
Picture 9
LUNA BII
