SUPER MAX - SUPER JUNIOR
7191051 – EN
23
THE APPLIANCE CAN NOT BE MODIFIED!
12.1.
CLEANING OF THE FLUE
A correct lighting, the burning of a proper fuel, the loading of the suggested quantity of fuel, the right adjustments of
the secondary air control, the sufficient draught of the chimney and the presence of air for the combustion, are
essential for the good operation of the appliance.
The appliance should be completely cleaned at least once a year or every time it is needed (in case of bad
working and low yield).The cleaning must be carried out exclusively with cold equipment.
This operation should be carried out by a chimney sweeper who can simultaneously perform an audit of the flue
(checking of possible deposits). During the cleaning, it is necessary to remove from the appliance the ash drawer and
the smokes pipes. It is possible to clean the space for the collection of smokes from the hearth or through the smoke
exhaust, by using a brush and a vacuum cleaner.
Once the cleaning has been completed, the same has to be
positioned back in its seat.
12.2.
CLEANING OF THE GLASS
Thanks to a specific entry of the secondary air the building of deposit on the glass of the door is slowed down in a
remarkable way. However the building of this deposit cannot be avoided with the use of solid fuels such as wet wood,
and this is not to be considered as a defect of the appliance.
IMPORTANT:The cleaning of the sight glass must be carried out only and exclusively with cold appliance to
avoid the explosion of the same. Do not use cloths, abrasive or chemically aggressive products
by cleaning the hearth glass.
The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air
regulator, enough draught of the chimney-flue and the presence of combustion air are the essential elements for the
optimal functioning of the appliance and for the cleaning of the glass.
BREAK OF GLASSES:
Considering that the glasses are manufactured in glass-ceramic and resistant to heat shock up to 750 °C, they
are not subject to thermal shocks. Their break can be caused only by mechanic shocks
(bumps or violent closure of the door, etc.). Therefore, their replacement is not included in the warranty .
12.3.
CLEANING OF THE ASH-DRAWER
All the appliances are equipped with a hearth grate and an ash drawer for the
collection of the ashes (Picture 8 pos.
A
).
It is suggested to empty periodically the ash drawer and to avoid it fills
completely in order not to overheat the grate. Moreover, we recommend
leaving always 3-4 cm of ash in the hearth.
ATTENTION:
The ashes removed from the hearth have to be stored in a
container made of fire-resistant material equipped with an air-tight cover. The
container has to be placed on a fire-resistant floor, far from flammable
materials up to the switching off and complete cooling.
12.4.
VARNISHED DETAILS
After some years of product use a change in the varnished details colour is totally normal. This is due to the
considerable temperature range the product is subject to whenever in use and to the varnish ageing of time passing
by.
ATTENTION
: before any possible application of the new varnish, do clean and remove all the traces from the surface
which has to be varnished.
12.5.
ENAMELLED SURFACES
For the cleaning of enamelled surfaces use soap water or not aggressive and not chemically abrasive detergents.
After the cleaning do NOT let soapy water or any cleanser dry but remove them immediately.
13. SUMMER STOP
After cleaning the hearth, chimney and hood, totally eliminating the ash and other eventual residues, close all the
doors of the hearth and the relevant registers and disconnect the appliance from the chimney.
We suggest performing the cleaning operation of the flue at least once per year; verifying in the meantime the actual
status of the rope seals which cannot ensure the good operation of the equipment if they are not in good condition
and are not making a good seal! In this case the seals must be replaced.
In presence of dampness in the room where the stove has been placed, we advise you to put absorbent salts into the
hearth.
If you want to keep for long the aesthetic look of the cooker it is important to protect its internal walls in row cast iron
with neutral Vaseline.
Picture 8
A
