TermoSovrana
DSA
20
7094211 – EN
1.
TECHNICAL DATA
Definition:
thermocooker in accordance with
EN 12815
TERMOSOVRANA – DSA
Overall thermal power
in kW
16.6
Useful thermal power
in kW
13.5
Output power to liquid
(H
2
O) in kW
9
Output power to room
in kW
4.5
Hourly wood consumption
in kg / h (wood with 20% humidity)
3.9
Yield
81.2
CO measured at 13% oxygen
in %
0.12
Flue gas exhaust pipe diameter
in mm
130 S/P
Flue diameter
in mm
5m – 220x220 Ø220
∗∗∗∗
Water contained in the boiler
in litres
12
Chimney pressure
in (mm H
2
O)
1.7 – 2
Delivery and return connector diameter
(nominal bore)
1”F gas
External air intake section
Ø in mm
200
Exhaust gas emission
in g/s –
wood
17
Exhaust gas temperature
in °C -
wood
172
Optimum working temperature
in °C
70 - 75
Max. operating pressure
in bar
VEA
1,5 –
VEC
3
Furnace opening dimensions
mm (W x H)
217 x 172
Furnace body
/
furnace headpiece dimensions
in mm (W x H x D)
257 x 250 x 395
Oven dimensions
in mm (W x H x D)
330 x 300 x 410
Type of grill
Movable - flat
Thermocooker height
in mm
889
Thermocooker width
in mm
964
Thermocooker depth
(with handles) in mm
640
Weight
in Kg
150
Fire prevention safety distances
Chapter 4
∗∗∗∗
200 mm diameter can be used with flue of no less than 6 m
The heating volume of the cookers in accordance with
EN
12815
, for buildings whose thermal insulation does not
correspond to the provisions regarding heat protection, is:
(30 Kcal/h x m
3
)
- favourable type of building: 387 m³
(40 Kcal/h x m
3
)
- less favourable type of building: 290 m³
(50 Kcal/h x m
3
)
- unfavourable type of building: 232 m³
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater.
With temporary heating, in the event of interruptions which last more than 8 hours, the heating capacity is reduced by
about 25%.
IMPORTANT: The power of the connected heating system must be proportional to the power transferred to
the water by the thermocooker; a charge which is too low does not allow regular oven operation, while a
charge which is too high prevents adequate radiator heating.
