NordicTrack 24891.3, User Manual

31

HOW TO USE THE SOUND SYSTEM WITH A 

BLUETOOTH DEVICE

1.   Place or hold your Bluetooth-enabled device 

near the console.

2.   Turn on your device’s Bluetooth setting.

3.   Pair your device to the console.

   Press and hold the Audio button on the console’s 

speaker grill for 3 seconds. The Bluetooth speak-

ers will enter pairing mode. When your device and 

the console pair successfully, the audio from your 

device will play through the console’s speakers.

   Note: The console can save eight devices in its 

memory. If you have previously paired your device 

to the console, you can simply press the Audio but-

ton to connect your device to the console.

4.   Erase the console’s device memory if 

necessary.

   If you need to erase all the Bluetooth-enabled 

devices saved in the console’s memory, press and 

hold the Audio button for 10 seconds.

HOW TO USE THE SOUND SYSTEM WITH AN 

AUDIO CABLE

To play music or audio books through the console 

sound system while you exercise, plug a 3.5 mm male 

to 3.5 mm male audio cable (not included) into the 

jack on the console and into a jack on your personal 

audio player; make sure that the audio cable is fully 

plugged in. Note: To purchase an audio cable, see 

your local electronics store. 

Next, press the play button 

on your personal audio 

player. Adjust the volume 

level using the volume 

increase and decrease 

buttons on the console or 

the volume control on your personal audio player. 

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder (M) is designed 

for use with most full-size tablets. Do not place 

any other electronic device or object in the tablet 

holder.

To insert a 

tablet into the 

tablet holder 

(M), set the 

bottom edge 

of the tablet in 

the tray. Then, 

pull the clip 

over the top 

edge of the 

tablet. Make 

sure that the 

tablet is firmly 

secured in the tablet holder. Reverse these actions 

to remove the tablet from the tablet holder.

HOW TO ADJUST THE CUSHIONS

The treadmill features a cushioning system that 

reduces the impact as you walk or run on the treadmill. 

To adjust the cushions, first remove the key from the 

console and unplug the power cord. You may also 

need to place the treadmill in the storage position (see 

HOW TO FOLD THE TREADMILL on page 32).

See the drawing below. For a more firm walking 

platform, turn a cushion to the position shown in 

drawing 1; for a less firm walking platform, turn the 

cushion to the position shown in drawing 2. Adjust the 

other cushions in the same way. Note: Make sure 

that the cushions on the left and right sides of the 

treadmill are set to the same firmness level. The 

faster you run on the treadmill, or the more you 

weigh, the firmer the walking platform should be. 

ETS159918

(24891)

M

More firm

Less firm

1

2