background image

15

CONSOLE DIAGRAM 

ETS599611

(24985)

FEATURES OF THE CONSOLE 

The treadmill console offers an impressive array of 

features designed to make your workouts more effec-

tive and enjoyable. 

When the manual mode of the console is selected, you 

can change the speed and incline of the treadmill with 

the touch of a button. As you exercise, the console 

will display instant exercise feedback. You can even 

measure your heart rate using the handgrip heart rate 

monitor

.

 

In addition, the console offers twenty onboard work-

outs—ten calorie workouts and ten distance workouts. 

Each workout automatically controls the speed and 

incline of the treadmill as it guides you through an ef-

fective exercise session. 

The console also features an iFit Live mode that en-

ables the treadmill to communicate with your wireless 

network through an optional iFit Live module. With the 

iFit Live mode, you can download personalized work-

outs, create your own workouts, track your workout 

results, race against other runners, and access many 

other features. To purchase an iFit Live module at 

any time, go to www.iFit.com or call the telephone 

number on the front cover of this manual. 

You can even listen to your favorite workout music or 

audio books with the console’s premium stereo sound 

system while you get in shape. 

To turn on the power, see page 16. To use the man-

ual mode, see page 16. To use the stereo sound 

system, see page 18. To use an onboard workout, 

see page 19. To use an iFit Live workout, see page 

20. To use the information mode, see page 21.

IMPORTANT: If there is a sheet of plastic on the 

console, remove the plastic. To prevent damage 

to the walking platform, wear clean athletic shoes 

while using the treadmill. The first time the tread-

mill is used, observe the alignment of the walking 

belt, and center the walking belt if necessary (see 

page 25).

Note: The console can display speed and distance 

in either miles or kilometers. To find out which unit of 

measurement is selected or to change the unit of mea-

surement, see THE INFORMATION MODE on page 

21. For simplicity, all instructions in this section refer to 

miles.

Summary of Contents for 29836.1

































Reviews: