13
HOW TO EXERCISE ON THE ELLIPTICAL
To mount the elliptical, hold the handlebars and step
onto the pedal that is in the lower position. Then, step
onto the other pedal. Push the pedals until they begin
to move with a continuous motion.
Note: The crank
arms can turn in either direction. It is recommend-
ed that you turn the crank arms in the direction
shown by the arrow; however, for variety, you can
turn the crank arms in the opposite direction.
To dismount the elliptical, wait until the pedals come to
a complete stop.
Note: The elliptical does not have
a free wheel; the pedals will continue to move until
the flywheel stops.
When the pedals are stationary,
step off the higher pedal first. Then, step off the lower
pedal.
HOW TO CHANGE THE INCLINE OF THE RAMP
To vary the motion of the pedals, you can change the
incline of the ramp. To change the incline, press the
latch button, pull the ramp handle, and raise or lower
the ramp to the desired incline level. Then, release the
latch button and engage the latch pin into one of the
adjustment holes in the frame. The white line on the
latch button must be visible or the latch pin is not fully
engaged.
Make sure that the latch pin is firmly
engaged in one of the adjustment holes in the
frame.
Pedals
Crank
Arm
Handlebars
Ramp
Handle
Ramp
Latch
Button
