19
THE INFORMATION MODE
The console features an information mode that keeps
track of the total number of miles that the walking belt
has moved and the total number of hours that the
treadmill has been operated. The information mode
also allows you to select miles or kilometers as the unit
of measurement and to turn on and turn off the demo
mode. You can also choose an audio setting and a vol-
ume setting for your iFit workouts.
To select the information mode, hold down the Stop
button while inserting the key into the console.
The upper left digit(s) in the display will show the total
number of hours that the treadmill has been used.
The lower right digit(s) in the display will show the total
number of miles (or kilometers) that the walking belt
has moved.
An “E” for English miles or an “M” for metric kilometers
will appear as the top right digit in the display. Press
the 1 Step Speed increase button to change the unit of
measurement if desired.
When you use an iFit card, a personal trainer will guide
you through your workouts and give detailed instruc-
tions if “P” is selected as the audio setting. If you turn
off the “P” setting, your personal trainer will simply
guide you through your iFit workouts. Press the 1 Step
Incline decrease button to change the audio setting.
You can adjust the volume of the personal trainer
audio (0 through 5) by pressing the 1 Step Incline in-
crease button repeatedly. The volume setting appears
as the lower middle digit in the display.
The console features a dis-
play demo mode, designed to
be used if the treadmill is dis-
played in a store. While the
demo mode is turned on, the
console will function normally
when you plug in the power cord, switch the reset/off
circuit breaker to the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will ap-
pear next to the “E” or “M” while the information mode
is selected. To turn on or turn off the demo mode,
press the 1 Step Speed decrease button.
To exit the information mode, remove the key from the
console.
