background image

17

HOW TO PLAY THE FAT BLOCKER GAME

The Fat Blocker game requires quick thinking and fast

reflexes. In addition to the console buttons, you will

use the four-button game controllers on the handlebar

to play the game. Follow the steps below to play the

Fat Blocker game.

1. Begin pedaling or press any button on the

console to turn on the console.

When you turn on the console, the display will

light. The console will then be ready for use.

2. Select the Fat Blocker game.

To select the Fat Blocker game, press the Menu

button, select FITNESS GAMES, and then select

FAT BLOCKER.

3. Begin pedaling or press a button on either

controller to start the game.

When you start the Fat Blocker game, a game

arena will appear in the center of the display.

A block composed of four or five black squares will

slowly move downward until it reaches the bottom

of the arena. Another block will then move down-

ward. Blocks come in eight different shapes. As

each block falls, you can move it to the left or right

using the left and right buttons on the left con-

troller. In addition, you can rotate the block

counterclockwise or clockwise using the left and

right buttons on the right controller. Once you have

positioned and oriented a block, you can speed its

motion to the bottom of the arena, if desired, by

pressing the down button on either controller.

Your goal is to

maneuver the

blocks so that they

form a complete

row of black

squares across the

entire arena. Each

time you complete

a row of black squares, the row will disappear, and

all blocks above will move downward one row.

As you play, the blocks will fall faster and faster;

however, your pedaling pace will affect the speed

of the blocks—the faster you pedal, the more

slowly the blocks will fall, giving you extra time to

position and orient the blocks. The game will con-

tinue until any part of a stacked block reaches the

top of the arena.

When the game ends, the display will show your

final score and the level of play that you reached.

The display will then show the four highest scores

recorded since the scores were reset. If desired,

press and hold down the right button on either

controller to reset the scores. Note: If your score is

one of the four highest, the display will prompt you

to enter a name consisting of three letters or dig-

its. While the line below the first letter is flashing,

press the up and down buttons on either controller

to select the desired letter or digit. Next, press the

right button on either controller and select another

letter or digit. Repeat this process to select a third

letter or digit. Then, press the right button on either

controller again. The display will then show the

four highest scores recorded since the scores

were reset.

4. Follow your progress with the display.

While you exercise and play the Fat Blocker

game, the corners of the display will show the

elapsed time, the approximate number of calories

you have burned, and your pedaling pace. In addi-

tion, the display will show your current score and

the game level that you have reached.

To pause the game, press the center button. To

resume the game, press the center button repeat-

edly until the words FAT BLOCKER appear at the

top of the display, and then press a button on

either controller.

5. When you are finished exercising, the console

will turn off automatically.

See step 6 on page 14.

Complete Row

Summary of Contents for 480 Csx Bike





























Reviews: