25
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the main display will
show the following information:
The right side of the main
display will show the total
number of hours that the
treadmill has been used.
The left side of the main
display will show the total
number of miles that the
walking belt has moved.
An “E” for English miles or
an “M” for metric kilometers
will appear on the right side
of the main display. Press
the Speed + button to
change the unit of measure-
ment.
IMPORTANT: Make sure
that there is not a letter
“D” in the main display. If
a “D” appears in the display,
the console is in the “demo”
mode. This mode is in-
tended to be used only when a treadmill is displayed in
a store. When the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the displays and indicators on
the console will automatically light in a preset se-
quence, although the buttons on the console will not op-
erate. If a “D” appears in the display when the infor-
mation mode is selected, press the Speed – button
so the display is blank.
To exit the information mode, remove the key from the
console.
Summary of Contents for 4800r
Page 33: ...33 NOTES ...
