background image

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If this is not done, the treadmill may be-
come damaged. Remove the key and unplug the power
cord. CAUTION: You must be able to safely lift 45 pounds
(20 kg) to raise, lower, or move the treadmill. 

1. Hold the treadmill with your hands in the locations shown

at the right. 

CAUTION: To decrease the possibility of in-

jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. 
Raise the treadmill about halfway
to the vertical position. 

2. Move your right hand to the position shown and hold the

treadmill firmly. Pull the latch knob to the left and hold it.
Raise the treadmill until the plate passes the pin on the
latch knob. Release the latch knob. 

Make sure that the

plate is resting against the pin as shown.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of 
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert the treadmill to the stor-
age position as described above. 

Make sure that the lock

pin is fully inserted into the housing. 

1. Hold the handrails as shown and place one foot against a

wheel. 

2. Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location. 

Never

move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.

3. Place one foot on wheel, and carefully lower the treadmill

until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1. See drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left hand,

pull the latch knob to the left and hold it. Pivot the treadmill down until the plate is past the pin on the latch knob.

2. See drawing 1. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not drop the

treadmill. 

CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

Base

Front Wheels

Knob

Plate

1

2

26

               

Summary of Contents for 5600 R NTL18940



































Reviews: