8
5
5. The Console (4) can use four 1.5V D batteries
(not included); alkaline batteries are recom-
mended.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the screw, remove the
battery cover, insert the batteries into the bat-
tery compartment, and then reattach the battery
cover.
Make sure to orient the batteries as
shown by the diagrams inside the battery
compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter.
Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
6. While another person holds the Console (4)
near the Upright (2), connect the console wire
to the Main Wire Harness (43). Then, connect
the console pulse wires to the Pulse Extension
Wire (79).
Insert the excess wire downward into the
Upright (2).
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Upright (2) with four M4 x
16mm Flange Screws (80).
2
6
4
80
79
Console
Wire
Pulse Wires
80
43
Battery
Cover
Batteries
Screw
Batteries
4
Avoid pinching
the wires
