8
22
23
24
72
97
97
84
7
6
31
24
80
72
86
86
71
65
80
10
31
6.
Tip: Be careful not to damage the Upper
Wire Harness (65).
Apply a generous amount of the included
grease to the Upper Body Axle (71). Insert the
Upper Body Axle into the Upright (10).
Apply a small amount of grease to a Wave
Washer (80). Slide the Wave Washer onto the
left end of the Upper Body Axle (71).
Identify the Left Upper Body Leg (24), which is
marked with an “L” sticker, and orient it as
shown. Slide the Left Upper Body Leg onto the
left side of the Upper Body Axle (71).
Attach the Left Upper Body Leg (24) to the
Upper Body Axle (71) with an M8 x 19mm
Patch Screw (86) and an M8 x 23mm Washer
(31).
Repeat this step for the Right Upper Body
Leg (72).
Grease
Grease
7. Attach the Right Upper Body Arm (23) to the
Right Upper Body Leg (72) with three M8 x
14mm Patch Screws (84) and three M8 Split
Washers (97).
Attach the Left Upper Body Arm (22) in the
same way.
Summary of Contents for 831.23765.2
Page 23: ...23 NOTES...
