ELLIPTICAL QUICK TRAIN DOCUMENT
23924 – NORDICTRACK E 14.5
•
Take care not to drop the upright bolts into the side shield plastic.
•
Do not overlook putting the upper body arm covers onto the upright axle
before assembling the upper body arms.
•
Liberally grease the surfaces of the axles and bushings.
•
When assembling the upper body arms, make sure to seat the jam nuts into
the hexagonal holes in the upper body leg.
•
This elliptical will require approximately two minutes to boot up.
FOR MORE DETAILED INFORMATION, SEE “MAINTENANCE &
TROUBLESHOOTING” SECTION OF OWNER’S MANUAL.
FOR ANY QUESTIONS OR ASSISTANCE,
PLEASE CALL THE SEARS SUPPORT LINE AT:
1-800-TO BE FIT
Rev. 10/24/2012
