5
Assembly requires two persons.
Set the elliptical trainer in a cleared area and remove all packing materials. Do
not dispose of the packing materials until assembly is completed.
Assembly can be completed using the in-
cluded hex keys.
H
OW
T
O
A
SSEMBLE
T
HE
E
LLIPTICAL
T
RAINER
1. Lift the Left Handlebar Arm (17) to the position
shown. Attach the Left Handlebar Arm to the Frame
(1) with two 3/8” x 1 1/4” Button Head Screws (48)
and two 3/8” Lock Washers (100).
Repeat this step for the Right Handlebar Arm (not
shown).
2. Have another person hold the Upright (2) in the po-
sition shown. Connect the Lower Power Wire (96)
to the Upper Power Wire (97). Connect the Lower
CATV Cable (102) to the Upper CATV Cable (101).
Connect the Lower Battery Wire (77) to the Upper
Battery Wire (78). Connect the Lower Controller
Wire (80) to the Upper Controller Wire (79).
Attach the Upright (2) to the Frame (1) with four
3/8” x 1 1/4” Button Head Screws (48) and four 3/8”
Star Washers (85).
Make sure that no wires are
pinched between the Upright and the Frame.
17
1
2
48
48
48
48
85
97
96
85
85
77
79
80
102
2
1
100
100
1
101
78
