background image

10

HOW TO CONNECT THE POWER CORD

This product must be grounded. 

If it should malfunc-

tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock.  

This product is
for use on a dedi-
cated, 20-amp,
120-volt circuit.
No other appli-
ance should be
on the same cir-
cuit. This product
is equipped with
a cord having an
equipment-
grounding
conductor and a grounding plug. Plug one end of the
cord into the INCLINE TRAINER as shown in drawing
1. Attach the cord bracket over the cord with the in-
cluded allen wrench and the two bracket screws.

Plug the grounding plug into a standard NEMA 5-20 
receptacle as shown in drawing 2. Do not modify the
plug or the receptacle. Do not use an adapter, a surge
protector, or an extension cord. Note: If the included
power cord in not long enough, call Customer Care to
order a 12’ power cord.

HOW TO CONNECT A CATV CABLE

If your INCLINE TRAINER has the Workout TV con-
sole,

a CATV cable must be connected to the IN-

CLINE TRAINER for cable TV stations to be viewed. 

Locate the cable
jack on the front of
the INCLINE
TRAINER.
Connect the CATV
cable to the cable
jack. Route the
cable so that it will
not be pinched or
crushed by the
wheels when the incline is changed. 

A satellite receiver, VCR, or DVD player can also be
connected to the INCLINE TRAINER. Connect a CATV
cable from the coaxial output on your equipment (usu-
ally labeled TV OUT or RF OUT) to the cable jack on
the front of the INCLINE TRAINER.

Note: Audio/video equipment without coaxial outputs
(some satellite receivers and DVD players) will require
an RF modulator to work correctly with the INCLINE
TRAINER. RF modulators are not available from
FreeMotion Fitness, but are available at electronics
stores. See the owner's manual for the equipment you
wish to connect to determine if an RF modulator is
needed, or contact your local audio/visual service
provider.

DANGER:

Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet 
installed by a qualified electrician. Do not use
an adapter to connect the plug to an improper
receptacle.

H

OW TO

C

ONNECT THE 

I

NCLINE 

T

RAINER

1

Cord

Cord

Bracket

Bracket

Screws

Cable Jack

NEMA 5-20

Receptacle

2

Summary of Contents for 9800 Spain Treadmill















































Reviews: