9
6
7
6. Using a small plastic bag to keep your fingers
clean, apply a generous amount of the included
grease to the right axle on the Upright (2).
Next, identify the Right Handlebar Leg (13),
which is marked with an “R” sticker, and orient it
as shown.
Slide the Right Handlebar Leg (13) onto the axle
on the Upright (2). Attach the Right Handlebar
Leg with an M10 x 20mm Screw (61) and an
M10 Washer (64).
Attach the Left Handlebar Leg (12) in the
same way.
7. Identify the Right Pedal Arm (15), the Right
Pedal (9), and the Right Pedal Insert (70), which
are marked with “R” stickers.
Attach the Right Pedal (9) and the Right Pedal
Insert (70) to the Right Pedal Arm (15) with six
M6 x 12mm Screws (78).
Attach the Left Pedal (not shown) and the
Left Pedal Insert (not shown) to the Left
Pedal Arm (not shown) in the same way.
12
13
Grease
64
9
15
70
78
61
2
