background image

23

2.  Select the optional screens.

   While the settings mode is selected, the matrix 

will display several optional screens. Press the 

decrease button next to the Enter button to select 

each of the following screens:

  

UNITS—To change the unit of measurement, press 

the Enter button. To view distance in miles, select 

ENGLISH. To view distance in kilometers, select 

METRIC.

  

DEMO—The console features a display demo 

mode, designed to be used if the treadmill is dis-

played in a store. While the demo mode is turned 

on, the console will function normally when you 

plug in the power cord, press the power switch 

into the reset position, and insert the key into the 

console. However, when you remove the key, the 

displays will remain lit, although the buttons will not 

function. If the demo mode is turned on, the word 

ON will appear in the matrix. To turn on or turn off 

the demo mode, press the Enter button.

   If an iFit module is connected, you may also 

select the following screens:

  

TRAINER VOICE—To turn on or turn off the audio 

coach, press the Enter button.

   DEFAULT MENU—The default menu will appear 

when you insert the key into the console or when 

you press the Home button. Press the Enter button 

repeatedly to select the manual main screen or the 

iFit screen as the default menu.

  

CHECK WIFI STATUS—Press the Enter button 

to check the status of your iFit module. The lower 

display will show the software version number, the 

network SSID, the network encryption type, the 

connection status, the wireless signal strength, the 

IP address of the module, the number of registered 

users and their names, the results of the DNS 

lookup, and the status of the iFit server.

  

SEND/RECEIVE DATA—To send and receive 

workouts, workout logs, and updates, press the 

Enter button. When the process is finished, the 

words TRANSFERS DONE will appear in the  

display.

3.  Exit the settings mode.

   To exit the settings mode, press the Settings 

button.

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your 

goal is to 

burn fat or to 

strengthen your 

cardiovascular 

system, the key 

to achieving the 

best results is 

to maintain the 

proper heart 

rate during your 

workouts. The optional chest heart rate monitor will 

enable you to continuously monitor your heart rate 

while you exercise, helping you to reach your personal 

fitness goals. To purchase a chest heart rate moni-

tor, please see the front cover of this manual.

Note: The console is compatible with all BLUETOOTH 

Smart heart rate monitors.

Summary of Contents for C 220i





































Reviews: