background image

24

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 23.

A. Plug one end of a long 1/8” to RCA stereo audio

cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into the AUDIO OUT jack on your VCR. 

B. Plug one end of a long 1/8” to RCA stereo audio

cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into an RCA Y-adapter (available at electronics
stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR and
plug the wire into the unused side of the Y-adapter.
Plug the Y-adapter into the AUDIO OUT jack on
your VCR.

HOW TO USE AN IFIT.COM MP3, CD, OR VIDEO 
PROGRAM

To use an iFIT.com MP3, CD, or video program, the
treadmill must be connected to your MP3 player, CD
player, or VCR. See HOW TO CONNECT THE
TREADMILL TO USE IFIT.COM PROGRAMS on
pages 22 to 24. 

To purchase and download

iFIT.com MP3 programs, go to www.iFIT.com. To
purchase iFIT.com CDs or videocassettes, call toll-
free 1-888-825-2588.

Follow the steps below to use an iFIT.com MP3, CD,
or video program.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 13. 

Identify yourself as user A, B, C, or D.

See step 2 on page 13.  

Select the iFIT.com mode.

To select the
iFIT.com
mode, press
the
Programs
button until
the letters
“iFIT” ap-
pear in the
display. 

Press the Play button on your MP3 player, CD
player, or VCR.

Note: If you are using an iFIT.com CD, insert the
CD into your CD player; if you are using an
iFIT.com videocassette, insert the videocassette
into your VCR.

A moment after the Play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s 
instructions. Note: If the time is flashing in the dis-
play, press the Start button or the Speed increase
button on the console. The treadmill will not re-
spond to an MP3, CD, or video program while the
time is flashing in the display.

4

3

2

1

AUDIO OUT

RIGHT

LEFT

VIDEO  AUDIO

ANT. IN

RF OUT

IN

OUT

CH

3

4

Audio Cable

A

VIDEO  AUDIO

ANT. IN

RF OUT

IN

OUT

CH

3

4

B

Wire removed from

AUDIO OUT jack

RCA 

Y-adapter

Audio Cable

Summary of Contents for C2420 Treadmill







































Reviews: