background image

25

HOW TO SET UP THE CONSOLE 

Before using the treadmill for the first time, set up the 

console. 

1.  Connect to your wireless network.

 

  

Note: In order to access the Internet, download 

iFit workouts, and use several other features of 

the console, you must be connected to a wireless 

network. See HOW TO USE THE WIRELESS 

NETWORK MODE on page 4 to connect the con-

sole to your wireless network.

2.  Check for firmware updates.

   First, see step 1 on page 31 and step 2 on page 

33 and select the maintenance mode. Then, 

see step 3 on page 33 and check for firmware 

updates.

3.  Calibrate the incline system.

   

  

See step 4 on page 34 and calibrate the incline 

system of the treadmill.

4.  Create an iFit account.

 

  

Touch the globe button near the lower left corner of 

the screen and touch the iFit button.

 

  

Note: For information about navigating in the 

browser, see page 33. The browser will open to 

the iFit.com home page. Follow the prompts on the 

website to sign up for your iFit membership. If you 

have an activation code, select the code activation 

option.

The console is now ready for you to begin working out. 

The following pages explain the various workouts and 

other features that the console offers.

To use the manual mode, 

see this page.

 To use 

an onboard workout, 

see page 27.

 To use a 

set-a-goal workout, 

see page 28. 

To use an iFit 

workout, 

see page 29.

To use the equipment settings mode, 

see page 31. 

To use the sound system, 

see page 32.

 To use the 

Internet browser, 

see page 33.

 To use the main-

tenance mode, 

see page 33.

 To use the wireless 

network mode, 

see page 34.

To operate the digital TV, 

see page 35. 

To use 

the entertainment mode, 

see page 36. 

To use the 

remote control, 

see page 36. 

To adjust the TV set-

tings, 

see page 37. 

To troubleshoot the digital TV,

 

see page 42.

 

IMPORTANT: If there are sheets of plastic on the 

console, remove the plastic. To prevent damage 

to the walking platform, wear clean athletic shoes 

while using the treadmill. The first time you use 

the treadmill, observe the alignment of the walking 

belt, and center the walking belt if necessary (see 

page 42).

HOW TO USE THE MANUAL MODE

1.  Insert the key into the console.

  

See HOW TO TURN ON THE POWER on page 

24. 

Note: It may take a minute for the console 

to be ready for use.

2.  Select the main menu.

   When you turn 

on the power, 

the main menu 

will appear 

after the 

console boots 

up. Touch the 

home button in 

the lower left corner of the screen (not shown here) 

to return to the main menu at any time.

3.  Start the walking belt and adjust the speed.

   Touch the Start button on the screen or press the 

Start button on the console to start the walking 

belt. You can also press the Manual button on the 

console, and then touch the Resume button on 

Summary of Contents for Commercial 2950 NTL22113.0





















































Reviews: