26
HOW TO ADJUST TELEVISION SETTINGS IN TV
MODE OR AV MODE
1. Enter the main menu.
Press the Menu button to enter the main menu.
You must use your remote control to adjust televi-
sion settings. Press the Exit button to exit the
menu. Press the Channel (CH) increase and de-
crease buttons to highlight an item and the Volume
(VOL) increase and decrease buttons on your re-
mote control to select a menu option or adjust the
settings if desired.
2. Adjust the picture settings.
Select the Picture menu option by pressing the
Volume increase or decrease button on your re-
mote control. Adjust the brightness, contrast, and
colour. Select the Reset option to restore the origi-
nal television settings.
3. Adjust the system settings.
Select one of the ten OSD (on-screen display) lan-
guages. The OSD language is the language which
indicators on the screen (such as the menu or the
electronic program guide) will appear in. The OSD
language option will only function in TV mode.
Adjust the clock setting to set the sleep timer. If you
set the sleep timer, the television will turn off after
the indicated number of minutes. A countdown will
warn you when the television is about to turn off.
Select a screen size of 16:9 or 4:3. Select the rota-
tion of the image. Adjust the Blue Back setting to
turn on or turn off the blue background when the
television is not receiving a signal.
4. Adjust the preset settings.
Note: The preset settings option is available only
while in the TV mode.
Adjust the settings for a specific channel by select-
ing that channel number in the Position option.
Turn on or turn off the Remember option to view or
skip the channel when using the Channel increase
and decrease buttons.
To remove all saved channels and rescan for
channels, select the Auto-search option and press
the Volume increase button. The television will
begin scanning all of the channels available in your
area. When no signal is detected on a channel, the
channel will be skipped. When a signal is detected,
the channel will be saved into memory and the
next channel will be selected. This process will
continue until the highest channel is reached. The
television will renumber the channels in the order
in which it locates them.
Do not remove the key
while the television is scanning channels.
Note:
Make sure to set the sound system and the colour
system before you scan for channels.
Select the Swap setting to set the channel in the
Position setting as your required channel. Adjust
the Fine setting to increase signal quality. Select
the Search option and press the Volume increase
and decrease buttons on your remote control to
find the best signal quality possible for the current
channel. The television will begin scanning for that
channel. When the image is clear, press the Menu
button.
Select I, DK, or BG as the sound system. Select
Auto, PAL, or SECAM as the colour system. Try all
the settings, if necessary, to find the optimal set-
ting.
5. Exit the menu.
Press the Exit button to exit the menu.
