10
9
95
113
46
Flat
Side
12
39
Grease
50
121
9. Apply grease to the axle on the right Crank Arm
(39).
Orient a Pedal Arm Sleeve (46) so that the flat
side is facing the elliptical. Slide the Pedal Arm
Sleeve onto the axle on the right Crank Arm
(39).
Attach the Pedal Arm Sleeve (46) with an M8 x
25mm Patch Screw (121), a Large Axle Cover
(113), and an M8 Washer (95).
Next, pull upward on the Latch (50) on the Right
Pedal Arm (12). Press the Right Pedal Arm onto
the Pedal Arm Sleeve (46).
Make sure that the
Right Pedal Arm latches into place.
Repeat steps 8 and 9 on the other side of
the elliptical
.
10
10. Press the Ramp Cover (131) downward onto
the Ramp (130).
131
130
