9
8
8. Locate the Pedal Arm Roller (32) on the Right
Pedal Arm (12). Set the Pedal Arm Roller on the
Ramp (130).
Have a second person hold the Right Pedal
Arm (12) until you complete step 9.
7. Identify the Right Pedal (14) and the Right
Pedal Arm (12), which are marked with “Right”
stickers, and orient them as shown.
Attach the Right Pedal (14) to the Right Pedal
Arm (12) with three M8 x 44mm Patch Screws
(55) and three M8 Washers (95);
do not
tighten the Patch Screws yet.
Next, tighten two M6 x 50mm Patch Screws
(62) and two Small M6 Washers (112) into the
Right Pedal Arm (12) and the Right Pedal (14).
Then, tighten the three M8 x 44mm Patch
Screws (55).
Attach the Left Pedal (not shown) to the Left
Pedal Arm (not shown) in the same way.
7
14
12
95
95
55
32
12
112
130
62
Do not use
these holes