7
5. Pull the Backrest Knob (15) out as far as it will
go. Insert the Backrest Bracket (4) into the Seat
Frame (3), and engage the Backrest Knob in
one of the holes in the Backrest Bracket.
Make
sure that the Back Rest Knob is securely
engaged in a hole.
Apply a small amount of the included grease to
an M10 x 256mm Bolt (17). Attach the Backrest
Frames (5) to the Seat Frame (3) with the Bolt,
two M10 Washers (22), and two M10 Locknuts
(24).
Do not overtighten the Locknuts; the
Backrest must pivot freely.
24
5
3
4. Attach the Backrest Plate (6) and the Backrest
(7) to the Backrest Frames (5) with four M6 x
60mm Screws (19) and four M6 Washers (23).
See step 3 and tighten the M10 Locknuts
(24).
23
19
23
5
6
19
7
5
22
5
17
24
22
15
4
4
All manuals and user guides at all-guides.com
