background image

23

HOW TO USE AN IFIT WORKOUT

iFit cards are available separately. To purchase iFit 

cards, go to www.iFit.com or see the front cover of this 

manual. iFit cards are also available at select stores.

1.   Begin pedaling or press any button on the  

console to turn on the console.

   See HOW TO TURN ON THE POWER on  

page 17.

2.   Insert an iFit card and select a workout.

   To use an iFit workout, insert an iFit card into the 

iFit slot; make sure that the iFit card is oriented so 

that the metal contacts are face down and are fac-

ing the slot. When the iFit card is properly inserted, 

the indicator next to the slot will turn on and text will 

appear in the display. 

   Next, select the desired workout on the iFit card by 

pressing the increase and decrease buttons next to 

the iFit slot.

   A moment after you select a workout, the voice of a 

personal trainer will begin guiding you through your 

workout.

   iFit workouts function in the same way as preset 

workouts. To use the workout, see steps 3 to 6 

starting on page 19.

3.   When you are finished exercising, remove the 

iFit card. 

   Remove the iFit card when you are finished exer-

cising. Store the iFit card in a secure place.

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console’s 

sound system while you exercise, plug your audio 

cable into the jack on the console and into a jack on 

your MP3 player or CD player; make sure that your 

audio cable is fully plugged in. 

Next, press the Play button on your MP3 player or 

CD player. Adjust the volume level using the volume 

control on your MP3 player or CD player or press the 

Volume increase and decrease buttons on the console. 

THE OPTIONAL HEART RATE MONITOR

Whether your 

goal is to 

burn fat or to 

strengthen your 

cardiovascular 

system, the key 

to achieving the 

best results is 

to maintain the 

proper heart 

rate during your 

workouts. The optional chest heart rate monitor will 

enable you to continuously monitor your heart rate 

while you exercise, helping you to reach your personal 

fitness goals. To purchase a chest heart rate moni-

tor, please see the front cover of this manual.

iFit Slot

iFit Card

Summary of Contents for E 4.1 NTEVEL75012.0

































Reviews: