background image

17

CONSOLE DIAGRAM

FEATURES OF THE CONSOLE

The advanced console offers an array of features 
designed to make your workouts more effective and 
enjoyable. 

When you use the manual mode of the console, you 
can change the resistance of the pedals with the touch 
of a button. While you exercise, the console will display 
continuous exercise feedback. You can also measure 
your heart rate using the handgrip heart rate monitor. 

The console offers twenty onboard workouts——ten 
calorie workouts and ten performance workouts. Each 
workout automatically changes the resistance of the 
pedals as it guides you through an effective workout.

The console also features an iFit Live mode that 
enables the console to communicate with your wireless 
network through an optional iFit Live module. With the 
iFit Live mode, you can download personalized work-
outs, create your own workouts, track your workout 
results, race against other runners, and access many 
other features. 

To purchase an iFit Live module at 

any time, go to www.iFit.com or call the telephone 
number on the front cover of this manual.

 

You can even connect your MP3 player or CD player 
to the console sound system and listen to your favorite 
music or audio books while you exercise.

To use the manual mode,

 see page 18. 

To use 

an onboard workout,

 see page 20. 

To use an iFit 

Live workout,

 see page 21. 

To use the sound sys-

tem,

 see page 22. 

To change console settings,

 

see page 22. 

Note: If there is a sheet of plastic on the display, 
remove the plastic.

Summary of Contents for E 5.5 Elliptical

































Reviews: