7
3. Identify and orient the Upright (5) and the Top
Cover (27) as shown.
Slide the Top Cover (27) upward onto the
Upright (5).
Have a second person hold the Upright (5) and
the Top Cover (27) near the Main Frame (1).
Locate the wire tie in the Upright (5). Tie the
lower end of the wire tie to the Main Wire (60).
Next, pull the upper end of the wire tie until the
Main Wire is routed through the Upright.
Tip: To prevent the Main Wire (60) from
falling into the Upright (5), secure the Main
Wire with the wire tie.
4.
Tip: Avoid pinching the Main Wire (60).
Insert
the Upright (5) into the Main Frame (1).
Attach the Upright (5) with four M8 x 16mm
Patch Screws (102) and four M8 Split Washers
(103);
do not tighten the Patch Screws yet.
You will tighten the Patch Screws at the end
of step 11.
3
5
Wire Tie
Wire Tie
27
60
1
4
5
60
102
102
102
102
103
103
103
1
Avoid pinching the
Main Wire (60)
