10
10
4
77
7
Avoid pinching
the wires
10.
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Handlebar (7) with four M4 x
16mm Screws (77);
start all the Screws, and
then tighten them.
11. Attach the Upright Cover (57) to the Handlebar
(7) with two M4 x 16mm Screws (77).
11
57
7
77
12
41
42
Wire
10
67
12. Attach the Seat Handlebar (10) to the Seat
Carriage (41) with four M8 x 38mm Screws (67);
start all the Screws, and then tighten them.
Then, plug the wire on the Seat Handlebar (10)
fully into the Frame Pulse Receptacle (42) on the
left side of the exercise bike.
