12
10
75
88
81
15
15. Slide the Backrest Back (81) onto the Seat
Handlebar (10).
Attach the Backrest Back (81) with four M6 x
30mm Screws (75) and four M6 Washers (88);
start all the Screws, and then tighten them.
16. Identify the Right Pedal (21).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (21)
clockwise
into the Right Crank
Arm (23).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the strap
onto the tabs on the Right Pedal.
Adjust the
strap on the Left Pedal (not shown) in the
same way.
16
23
21
