9
7
2
57
8
69
7
Wires
Wires
Wire Tie
Wire Tie
7. Orient the Upright Cover (57) as shown. Hold the
Upright Cover near the Upright (2), and insert
the wires upward through the Upright Cover.
Then, slide the Upright Cover (57) onto the
Upright (2).
8. Orient the Handlebar (7) as shown. While a
second person holds the Handlebar near the
Upright (2), insert the wires upward through the
Handlebar.
Tip: Avoid pinching the wires.
Attach the
Handlebar (7) to the Upright (2) with two M8 x
22mm Screws (69).
2
Avoid pinching
the wires
9
4
7
42
43
Console
Wires
9. Untie and discard the wire tie. While a sec-
ond person holds the Console (4) near the
Handlebar (7), connect the wires on the Console
to the Main Wire (43) and to the Frame Pulse
Wires (42).
Insert the excess wire into the Handlebar (7).
