11
10. Remove the two #8 x 1 1/4" Screws (107) and
slide the Left Handrail Cover (79) back about
1 in. The Screws will be reattached in a later
step. Note: It is not necessary to move the Left
Handrail Insert (84).
With the help of a second person, hold the con-
sole assembly near the left handrail
assembly (B).
Route the Upright Wire (81) around the back of
the console assembly as shown, and insert the
end of the Upright Wire through the indicated
looped Cable Tie (99).
Console
Assembly
79
107
81
99
10
B
84
9. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Remove the four indicated 1/4" x 1/2" Screws (4)
from the Console Frame (104). These are used
in a later step.
Attach the Left and Right Cup Holders (36, 27)
with eight #8 x 1/2" Screws (1). Do not over-
tighten the Screws.
Console
Assembly
1
9
4
4
1
1
104
1
27
36