12
12. Set the console assembly on the brackets on
the Handrails (87). Be careful not to pinch any
wires.
Attach the console assembly with the four 1/4"
x 1/2" Screws (4) that you removed in step 9
and four 1/4" Star Washers (5). Start all four
Screws and then tighten them.
12
87
87
4
5
5
Console
Assembly
4
11. Remove the two #8 x 1 1/4" Screws (107) and
slide the Right Handrail Cover (80) back about
1 in. The Screws will be reattached in a later
step. Note: It is not necessary to move the Right
Handrail Insert (85).
With the help of a second person, hold the con-
sole assembly near the right handrail
assembly (C).
Make sure that the pulse wire (E) is inserted
through the looped Cable Tie (99) on the right
handrail assembly (C).
Route the pulse wire (E) around the back of the
console assembly as shown, and insert the end
of the wire through the other Cable Tie (99).
Console
Assembly
107
80
99
99
E
E
11
C
85