NordicTrack Ex 3.2 User Manual Download

Page: 20 / 28

6. Follow your progress with the display.

See step 4 on page 15.

The My Trail tab will show a map of the trail you are

walking or running or it will show a track and the

number of laps you complete.

During a competition workout, the Compete tab

will show your progress in the race. As you race,

the top line in the matrix will show how much of the

race you have completed. The other lines will show

other competitors. The end of the matrix represents

the end of the race.

7. Measure your heart rate if desired.

See step 5 on page 16.

8. When you are finished exercising, the console

will turn off automatically.

See step 6 on page 16.

For more information about the iFit mode, go to

www.iFit.com.

HOW TO CHANGE CONSOLE SETTINGS

The console features a user mode that allows you to

view usage information, select a unit of measurement,

and adjust the contrast level of the display.

When an iFit module is connected to the console,

you can also use the information mode to choose an

audio setting for the voice of the personal trainer, set a

default menu, check the status of the iFit module, and

check for downloads.

1. Select the information mode.

To select the information mode, press and hold

down the Display button for a few seconds until the

information mode appears in the display.

2. View usage information.

The display will show the total number of hours that

the exercise bike has been used. The display will

also show the total distance (in miles or kilometers)

that has been pedaled on the exercise bike.

3. Select a unit of measurement if desired.

The word ENGLISH for English miles or the word

METRIC for metric kilometers will appear in the

display to indicate the currently selected unit of

measurement.

To change the unit of measurement, press the

Enter button repeatedly to select the desired unit of

measurement.

4. Adjust the contrast level of the display if

desired.

Press the decrease button to view the contrast

level. The currently selected contrast level will

appear in the display. Press the 1 Step Resistance

increase and decrease buttons to adjust the con-

trast level.

Summary of Contents for Ex 3.2





























Search results

Summary of Contents for Ex 3.2

Reviews:

Related manuals for Ex 3.2

Brands by name

Popular brands

NordicTrack Ex 3.2, User Manual

Search results

Summary of Contents for Ex 3.2

Reviews:

Related manuals for Ex 3.2

Brands by name

Popular brands