background image

22

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the 

reed switch should be adjusted. To adjust the reed 

switch, first unplug the power adapter.

Next, use a 

standard screw-

driver and pry the 

Outer Disc (20) off 

the Right Outer 

Shield (23).

Next, locate the Reed Switch (56). Turn the Pulley (73) 

until a Magnet (65) is aligned with the Reed Switch. 

Next, remove the two M4 x 16mm Screws (98), 

and then remove the Reed Switch Bracket (54). 

Then, slightly loosen the two M4 x 10mm Clamp 

Screws (104).

Then, reattach the Reed Switch Bracket (54) and slide 

the Reed Switch (56) slightly closer to or away from the 

Magnet (65). Plug in the power adapter and rock the 

Pulley (73) forward and backward so that the Magnet 

passes the Reed Switch repeatedly. Repeat these 

actions until the console displays correct feedback. 

When the reed switch is correctly adjusted, remove 

the Reed Switch Bracket (54), retighten the two 

M4 x 10mm Clamp Screws (104), and reattach the 

Reed Switch Bracket.

Then, reattach the outer disc to the right outer shield 

and plug in the power adapter.

HOW TO ADJUST THE GLIDE CABLES

If the underside of a pedal arm touches the glide 

cables when a person is standing on the pedals, the 

glide cables on that pedal arm should be adjusted. 

When you adjust the glide cables, you must tighten 

the nuts the same number of turns on both glide 

cables. 

Locate the indicated ends of the Glide Cables (62).

Next, hold one of the Glide Cables in place with a 

wrench or a pair of pliers in the indicated location (A). 

Then, use another wrench to tighten the nut (B) several 

turns; make sure to count the number of turns you 

make as you tighten the nut.

Repeat these actions to adjust the other glide cable; 

make sure to tighten both nuts the same number of 

turns. Then, have a second person stand on the ped-

als and check to see if the underside of the pedal arm 

is still touching the glide cables. 

Continue adjusting the glide cables until the pedal arm 

no longer touches the glide cables when a person is 

standing on the pedals. 

Repeat these actions to adjust the glide cables on 

the other pedal arm, if necessary. 

98

54

104

73

65

56

62

B

62

A

23

20

Summary of Contents for FREESTRIDE





























Reviews: