NordicTrack Gx 3.0 Manual Download

Page: 15 / 28

HOW TO TURN ON THE POWER

IMPORTANT: If the exercise bike has been

exposed to cold temperatures, allow it to warm to

room temperature before turning on the power. If

you do not do this, you may damage the console

displays or other electrical components.

Plug in the power adapter (see HOW TO PLUG IN

THE POWER ADAPTER on page 12). When the

power adapter is plugged in, the displays will light and

the console will be ready for use.

Note: The console can display speed and distance in

either kilometers or miles. To find out which unit of

measurement is selected or to change the unit of

measurement, see HOW TO CHANGE CONSOLE

SETTINGS on page 21.

HOW TO USE THE MANUAL MODE

1. Begin pedaling or press any button on the

console to turn on the console.

See HOW TO TURN ON THE POWER above.

2. Select the manual mode.

Each time you turn on the console, the manual

mode will be selected.

If you have

selected a

workout, rese-

lect the

manual mode

by pressing

any of the

Workouts

buttons

repeatedly until zeros appear in the display.

3. Begin pedaling and change the resistance of

the pedals as desired.

As you pedal, change the resistance of the pedals

by turning the resistance dial.

To increase the resistance, turn the resistance dial

clockwise; to decrease the resistance, turn the

resistance dial counterclockwise. Note: After you

change the resistance, it will take a moment for

the pedals to reach the selected resistance level.

4. Follow your progress with the displays.

The console offers several display modes. The

display mode that you select will determine which

workout information is shown. Press the Display

button repeatedly to select the desired display

mode.

The displays can show the following workout infor-

mation:

Time

—When

the manual

mode is

selected, this

display will

show the

elapsed time.

When a work-

out is

selected, the display will show the time remaining

in the workout instead of the elapsed time.

Speed

—This display will show your pedaling

speed, in kilometers per hour or miles per hour.

Distance

—This display will show the distance you

have pedaled, in kilometers or miles.

Calories

—This display will show the approximate

number of calories you have burned.

Watts

—This display will show your approximate

power output in watts (Wt.).

Summary of Contents for Gx 3.0





























Search results

Summary of Contents for Gx 3.0

Reviews:

Related manuals for Gx 3.0

Brands by name

Popular brands

NordicTrack Gx 3.0, Manual

Search results

Summary of Contents for Gx 3.0

Reviews:

Related manuals for Gx 3.0

Brands by name

Popular brands