5
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1
1.
Go to www.iconsupport.eu on your computer
and register your product.
•
activates your warranty
•
saves you time if you ever need to contact
Customer Service
•
allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Service (see the front cover of this
manual) and register your product.
2
2
15
14
13
1
2.
If there is a shipping insert (not shown) in the
front of the Frame (1), remove and discard it.
Identify the Front Stabilizer (2). Attach the Front
Stabilizer to the Frame (1) with two M8 x 58mm
Screws (13), two M8 Split Washers (14), and two
M8 Curved Washers (15).
