6
3
15
14
13
1
3.
If there is a shipping insert (not shown) in the
rear of the Frame (1), remove and discard it.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M8 x 58mm Screws (13), two M8 Split
Washers (14), and two M8 Curved Washers (15).
3
4
18
A
B
17
4. Identify the Right Pedal (18).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (18)
clockwise
into the Right Crank
Arm (17).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
Next, adjust the strap (A) on the Right Pedal
(18) to the desired position, and press the
ends of the strap onto the tabs (B) on the Right
Pedal.
Adjust the strap on the Left Pedal (not
shown) in the same way.
