9
25
24
4
9
9. Attach the Front Handlebar Cover (25) to
the Handlebar Post (4) with an M4 x 18mm
Screw (24).
10
28
20
34
33
40
41
46
1
10. Orient the Seat (34) and the Seat Carriage (33)
as shown. Attach the Seat to the Seat Carriage
with four M8 Seat Locknuts (41) and four M8
Seat Split Washers (40).
11
11. Insert the Seat Post (28) into the Post Sleeve
(46). Then, tighten the Seat Post Knob (20)
firmly into the Frame (1) and into an adjustment
hole in the Seat Post.
Move the Seat Post (28) upward or downward
slightly to make sure that the Seat Post Knob
(20) is engaged in one of the adjustment
holes in the Seat Post.