8
6
5
23
3
2
6. Locate the Adjustment Handle (23) on the Seat
Post (2). Loosen the Adjustment Handle and
slide the Seat Carriage (3) onto the Seat Post.
Note: The Adjustment Handle (23) functions
like a ratchet. Turn the Adjustment Handle in
the desired direction, pull it downward, turn it in
the opposite direction, push it upward, and then
turn it in the desired direction again. Repeat this
process as many times as necessary.
Slide the Seat Carriage (3) to the desired posi-
tion and then tighten the Adjustment Handle (23)
into the underside of the Seat Carriage.
Make
sure that the Adjustment Handle is firmly
tightened.
5. Remove the 1/4" x 1" Screw (43), the Carriage
Cover (40), and the Carriage Plate (42) from the
Seat Carriage (3). Set these parts aside until
step 6.
Slide the Seat (22) onto the post on the Seat
Carriage (3).
Make sure that the Seat is level
and that the nose of the Seat is pointing
straight ahead.
Then, tighten the two nuts (A) (only one nut is
shown) beneath the Seat (22).
43
40
42
3
A
22
