8
5. Locate the wire tie inside the Upright (4). Then,
locate the Main Wire (76), the Seat Pulse Wire
(75), and the Frame Pulse Wire (91) inside the
Frame (1).
Tie the lower end of the wire tie to the ends of
the Wires (75, 76, 91).
Then, pull the other end of the wire tie upward
until the Wires (75, 76, 91) are routed through
the Upright (4).
Then, slide the Shield Cover (5) downward and
press it onto the Right and Left Front Shields
(21, 22).
5
76
75
21
4
5
Wire Tie
Wire
Tie
1
22
6.
Tip: Avoid pinching the wires.
Attach the
Handlebar (6) to the Upright (4) with four
M6 x 20mm Screws (88) and four M6 Split
Washers (50).
6
6
88
50
4
Avoid pinching
the wires
91
