10
7. Attach the Left Handrail (88) to the Left Upright
(89) with two 5/16" x 1" Screws (5), two 5/16"
Star Washers (11), and a 5/16" x 1 1/2" Bolt (4).
Do not tighten the Screws and the Bolt yet.
Attach the Right Handrail (87) in the same
way.
Slide the Upright Wire (81) to the right side of
the indicated bracket. Be careful not to pinch
the Upright Wire between the Left Outside
Handrail Cover (80) and the bracket.
89
7
88
87
4
4
5
5
11
80
11
81
Bracket
8. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Remove the screws (B) attaching the Crossbar
(93). Note: There may be fewer screws than are
shown.
Next, lift off the Crossbar (93). Then, remove
the two screws (B) attaching the Console Frame
(104).
Discard the screws (B).
93
Console
Assembly
B
8
B
B
104
