11
11.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex keys
in a secure place; one of the hex keys is used to adjust the walking belt (see pages 29 and 30).
To protect
the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included.
10. With the help of a second person, raise the
front of the treadmill and insert the crossbar on
the Base (103) into the cutout in the cardboard
stand as shown.
Have the second person
hold the treadmill to prevent it from moving
forward or backward.
Firmly tighten the four 3/8" x 3 3/4" Screws (5).
With the help of the second person, lower the
treadmill off the cardboard stand.
Cardboard
Stand
5
103
5
10
9. Remove the tie from the upper end of the
Storage Latch (87). Attach the upper end of the
Storage Latch to the bracket on the Frame (67)
with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut
(7). Note: It may be necessary to move the
Frame back and forth to align the Storage Latch
with the bracket.
Lower the Frame (67) (see HOW TO LOWER
THE TREADMILL FOR USE on page 27).
Large
Barrel
Latch
Knob
67
3
87
9
7
