10
7. Have a second person hold the Left Handrail
(86) near the Left Upright (77). Insert the Left
Pulse Wire (90) from the Left Handrail through
the hole in the Left Upright, and pull it out of the
hole in the side of the Left Upright. Then, insert
the Left Pulse Wire through the loops in the ties.
Attach the Left Handrail (86) to the Left Upright
(77) with two 3/8" x 5" Screws (34) and two 3/8"
Star Washers (8).
Do not fully tighten the
Screws yet.
Attach the Right Handrail (88) to the Right
Upright (79) as described above.
Then, tighten
all four 3/8" x 5" Screws (34).
7
88
86
91
34
90
Hole
8
8
77
79
34
Ties
Ties
6. Set the Console Cover (87) on the Uprights (77,
79). Make sure that the Console Cover is ori-
ented so that the ties are toward the bottom.
Attach the Console Cover (87) with the two #8 x
1 1/2" Screws (104) that you removed in step 4.
Start both Screws, and then tighten them. Do
not overtighten the Screws.
Insert the Upright Wire (78) through the loops in
the ties.
6
Ties
87
79
104
78
77
