10
10. With the help of a second person, hold the con-
sole assembly near the handrail assembly.
Connect the Handrail Wire (86) and the Pulse
Wire (88) to the wires from the console. The
connectors should slide together easily
and snap into place. If they do not, turn one
connector and try again. IF YOU DO NOT
CONNECT THE CONNECTORS PROPERLY,
THE CONSOLE MAY BECOME DAMAGED
WHEN YOU TURN ON THE POWER.
Set the metal bracket on the console assembly
onto the metal frame inside the handrail assem-
bly. Be careful not to pinch the wires.
Attach the console assembly with two 3/8" x
2 1/2" Screws (4) and two 3/8" Star Washers
(12). Start both Screws, and then tighten
them.
Console
Assembly
Console
Wire
Handrail
Assembly
10
86
88
Metal
Bracket
12
12
4
4
9. Insert the wires into the Left Upright (89) as you
set the handrail assembly on the Left and Right
Uprights (89, 90). Be careful not to pinch the
wires.
Attach the handrail assembly with the four 3/8" x
2" Bolts (3) that you removed in step 6 and four
3/8" Star Washers (12). Start all four Bolts,
and then tighten them.
9
Wires
12
3
12
89
90
3
Handrail
Assembly
Console
Wire
