10
9. Have a second person hold the Console (33)
near the Upright (5).
Connect the wires on the Console (33) to the
Wire Harness (60) and to the Pulse Wire (105).
Insert the Pulse Wire (105) upward into the
Console (33). Insert the Wire Harness (60)
downward into the Upright (5).
Tip: Avoid pinching the wires.
Attach the
Console (33) to the Upright (5) with four M4 x
16mm Screws (106).
See step 3.
Tighten the four M8 x 16mm Patch
Screws (102).
9
33
60
5
105
106
Avoid pinching
the wires
10. Attach the Rear Upright Cover (25) to the
Upright (5) with four M4 x 16mm Screws (106).
25
106
10
5
