9
7
5
6 4
12
1
STEP 5
Put the Upper Computer Cable (6) through the
hole of Handlebar Post and then out of the top.
Fix the Handlebar (9) onto the Handlebar post
with Knob (14) and Tube (13) after adjusting the
Handlebar to a suitable position.
STEP 7
Attach the Tablet Holder (2) to the console with
four Screws (3), start all the screws, and then
tighten them.
Finally, Insert one side of adapter into the tail of
bike, and another plug insert to power supply.
Now, your machine is ready for use.
2
3
6
14
9
13
STEP 6
Connect the Upper Computer Cable (6) and
Handle Pulse Cable (12) onto the Computer (1).
Then fix the Computer (1) onto the handlebar
post with Self-tapping screw (4).
Lock the Computer Rack (5) tightly with Screw
(7).
