8
3. Identify the Right Upright (112), which is marked
with a sticker. Have a second person hold the
Right Upright near the Base (85) as shown.
See the inset drawing.
Tie the wire tie in the
Right Upright (112) securely around the end of
the Wire Harness (79). Then, pull the other end
of the wire tie until the Wire Harness is routed
completely through the Right Upright.
3
112
Wire
Tie
79 85
79
4. Have a second person hold the Right Upright
(112) against the Base (85), with the bend in the
Right Upright positioned as shown.
Be careful
not to pinch the Wire Harness (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 3/8" Bolts (10) and two 3/8"
Star Washers (18).
Do not fully tighten the
Bolts yet.
4
10
85
Bend
18
112 79
79
112
Wire Tie
