10
4. With the help of a second person, hold the con-
sole assembly near the right Upright (93).
Connect the Upright Wire (88) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, remove the tie securing the
Upright Wire.
Console
Assembly
Console
Wire
Tie
93
88
88
Console
Wire
4
3. Identify the Left and Right Base Covers (90, 97).
Slide the Left Base Cover (90) onto the left
Upright (93). Slide the Right Base Cover (97)
onto the right Upright.
Then, press the Left and Right Base Covers (90,
97) downward until they snap into place.
90
3
97
93
93
Summary of Contents for NTL17012.3
Page 5: ...5...