7.
Make sure that all parts are properly tightened before you use the treadmill.
Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the
walking belt (see page 30). To protect the floor or carpet, place a mat under the treadmill.
8
5. While pressing down on the Handrails (62), attach the
console assembly to the Uprights (90, 95) with eight
Upright Bolts (86) and four 3/8” Star Washers (88).
Start
all eight Upright Bolts before tightening any of them.
Note: The Left Accessory Tray (38) and the Right
Accessory Tray (43) are replaceable. If these parts be-
come dislodged from the console assembly, simply press
them back in.
5
Console
Assembly
86
43
88
88
90
62
86
38
95
62
86
6. Place the treadmill in the storage position (see HOW TO
FOLD THE TREADMILL FOR STORAGE on page 27).
Center the Frame (16) between the Uprights (90, 95).
Then, tighten the Upright Bolts (86) in the lower ends of
the Uprights.
90
95
16
86
86
86
6
